Anycubic Photon Vs AnyCubic Photon S: Is the upgrade worth it?

New upgrades, sleek design

AnyCubic Photon Southward

Resin printing at a budget

AnyCubic Photon

The new Photon S seems to be an excellent upgrade to the Photon. It'south faster, smoother, and yous tin yet get it at a low and first-class toll. If only they could've kept the metallic outside.

$470 at Amazon

Pros

• Z-axis bracing to reduce z-wobble
• New firmware and touchscreen
• Still a great cost

I'm a massive fan of the AnyCubic Photon. It's an first-class device for getting into resin 3D printing at a toll bespeak that's available for everyone. The merely issue is that terrible touchscreen, but that doesn't take away from the AnyCubic Photon's overall quality.

$355 at Amazon

Pros

• Amazing price
• Cute prints
• Solid metal construction

Cons

• Terrible touchscreen

While both the Photon and Photon S are mostly the same printer with some tweaks, the reinforced Z-axis makes the Photon South a good pick if you don't have either. If you already have the Photon, you don't need to spend coin to upgrade as the software features available on the S are now available on the OG Photon.

What are the big differences?

Since the Photon S is an upgrade of the original Photon, there are going to be quite a few similarities.

	Photon	Photon S
Layer height	0.01mm - 0.2mm	0.01mm - 0.2mm
Impress speed	10mm/h	20mm/h
Z Centrality	Single rod	Dual linear rails
Anti-aliasing	No	Yeah
Build volume	116 10 55 x 165mm	116 x 65 ten 165mm
Light source	UV LED	UV Matrix

As you can come across from the spec sheet above, at that place are a lot of similarities in each printer. The choice of whether to upgrade volition come down to some small just critical differences.

While the original Photon has a solid powder-coated steel chassis, the new Photon S is rigid plastic. This doesn't seem to make whatsoever deviation to the impress quality, although the other upgrades to the Photon S may be offsetting whatever issues. The change to plastic has reduced the weight past effectually 1.4 pounds, which is first-class, simply I still don't like the plastic body as much every bit the metal.

The metal body feels sturdy, while the plastic feels cheaper somehow. I would rather pay a little extra for the more sturdy build.

A much more than stable z-centrality on the Photon S is the main reason to upgrade.

That's probably the one downside to the new generation. A more stable z-axis on the Photon South is the master reason to upgrade. Instead of having a single-threaded rod for the Z-axis like the Photon, the S uses a threaded rod and a polish rod on either side. This change reduces the dreaded "Z-wobble" that can crusade prints to have strange lines. It wasn't a huge concern with the original Photon, and I have never experienced it.

Anti-aliasing, like on a calculator screen, smooths the edges of pixels, making the resolution of the print seem higher than it actually is. This is one of the new technologies to arrive on DLP 3D printers and should improve quality across the board on the Photon Due south. Now that the OG Photon too has Anti-Aliasing, it makes recommending the South a fiddling tougher. The Photon is now significantly cheaper than the Photon S with substantially the aforementioned software features, so the only reward is a amend z-axis and an upgraded light source.

The Photon Due south has an upgraded UV lite source called a matrix, which, along with a 10 Watt increase in ability, should increment the print speed. We have heard reports that the speed isn't equally high every bit AnyCubic suggests, but it is faster than information technology was earlier.

The last upgrade that I am happy they have added is the touchscreen. They reworked the entire interface and upgraded the touchscreen, then the issues I had in my review — the screen sometimes refusing to piece of work without the use of a stylus, for case — should no longer occur.

Should you upgrade?

The conclusion to upgrade comes down to if the tweaks matter to you. If you have the cash lying effectually, want a meliorate touchscreen, and an improved Z-axis, and then go for the Photon S. However, the differences are minimal, so don't worry if you already take a Photon and don't have the budget for an upgrade. Anti-aliasing is now bachelor on the OG Photon also, and it is now significantly cheaper, so if the price matters, you tin can start with the standard Photon.

New hotness

AnyCubic Photon S

A lightweight upgrade

With the extra bracing on the Z-centrality and the better touchscreen, the Photon S is an excellent upgrade to the original Photon. I merely wish they had kept the metal body.

Budget goodness

AnyCubic Photon

The best budget entry DLP printer

While the touchscreen may be a little janky, everything else about the Photon from AnyCubic is well-nigh perfect for anyone looking to get into resin 3D printing.

Nosotros may earn a committee for purchases using our links. Learn more than.

Ultimate control

Here are the best steering wheels for Forza Horizon v

Forza Horizon 5 features extensive and improved support for simulation steering wheels. To become the nigh out of this open-world racing game, consider one of the best racing steering wheels available for Forza Horizon 5.

Source: https://www.windowscentral.com/anycubic-photon-vs-anycubic-photon-s

Posted by: gurleygracts1948.blogspot.com

Share this post